Individual HPLC Components and Accessories
DWK Life Sciences KIMBLE™ KONTES™ Right Angle with Tip O-Ring PTFE Plug HI-VAC Valves
KIMBLE™ KONTES™ Right Angle with Tip O-Ring PTFE Plug HI-VAC Valves are designed for vacuum applications up to 5 x 10−7 torr. Features a precision external thread, non-rotating PTFE shaft, and FKM o-ring primary seal on a tapered seat.
DWK Life Sciences KIMBLE™ KONTES™ Replacement Plugs for Hi-Vac Right Angle Valve with Tip O-Ring
KIMBLE™ KONTES™ Replacement Plugs for Hi-Vac Right Angle Valve with Tip O-Ring are PTFE valve plugs designed for use in high-vacuum applications. Compatible with HI-VAC Right-Angle valves, these replacement plugs help maintain reliable vacuum sealing performance.
DWK Life Sciences KIMBLE™ KONTES™ Straight with Tip-O-Ring Glass Plugs
KIMBLE™ KONTES™ Straight with Tip-O-Ring Glass Plugs are ideal for applications where out-gassing plug material is undesirable. Made from borosilicate glass conforming to USP Type I and ASTM E438 Type I Class A. Fully interchangeable with other HI-VAC counterparts.
DWK Life Sciences KIMBLE™ KONTES™ Right Angle without Tip O-Ring PTFE Plug HI-VAC Valves
KIMBLE™ KONTES™ Right Angle without Tip O-Ring PTFE Plug HI-VAC Valves are designed for vacuum applications up to 5 x 10-7 torr, featuring a precision external thread, non-rotating PTFE shaft, and FKM o-ring primary seal on a tapered seat.
DWK Life Sciences KIMBLE™ KONTES™ Straight with Tip-O-Ring HI-VAC Valves
KIMBLE™ KONTES™ Straight with Tip-O-Ring HI-VAC Valves feature a glass plug and FKM O-rings for reliable high-vacuum sealing. Designed for demanding laboratory vacuum applications requiring a secure, chemically resistant valve solution.
DWK Life Sciences KIMBLE™ KONTES™ Hi-Vac Straight Low Hold Up Valves without Tip O-Ring
KIMBLE™ KONTES™ Hi-Vac Straight Low Hold Up Valves without Tip O-Ring feature bent sidearms to minimize liquid holdup. The PTFE plug provides precise flow control for both liquids and gases, suitable for high-vacuum laboratory applications.
MilliporeSigma™ MilliSolve Kit
The Millipore MilliSolve Filtration System has been designed for the filtration of liquid chromatography buffers and solvents under vacuum.
MilliporeSigma™ Supelco™ radiello™ BTEX Calibration Kit (CS2 Desorption)
The BTEX Calibration Kit (CS2 Desorption) was designed for the analysis of BTEX in urban environments.
MilliporeSigma™ Supelco™ column Blank Kit for HPLC
Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.
MilliporeSigma™ Supelco™ PHRED Photochemical Reactor
PHRED photochemical reactor can be used effectively to improve analyte detection in the presence of interfering matrix components, or when the analytes are present at low concentrations.
MilliporeSigma™ Supelco™ Hydrocarbon Kit acc. to DIN EN 14039/ISO 16703
Kit contains:
- mineral oil standard for calibration 8 mg/ml in heptane
- alkane standard solution
- heptane
- standard solution for the determination of the retention time
- Florisil™ tubes
MilliporeSigma™ Supelco™ Micro-Splitter Valves
Available in High and Low Pressure options
Thermo Scientific™ Rheodyne™ Suction Needle Adapter
Enable suction loading of Thermo Scientific™ Rheodyne™ 9725 and 9725i Sample Injectors for HPLC with this adapter.